TPS1H100AQPWPRQ1 TI
Pieejams |
TPS1H100AQPWPRQ1 TI
• Qualified for automotive applications • AEC-Q100 Qualified with the following results: – Device temperature grade 1: –40°C to 125°C ambient operating temperature range – Device HBM ESD classification level H3A – Device CDM ESD classification level C4B
• Functional safety capable – Documentation available to aid functional safety system design
• Single-channel smart high-side power switch with full diagnostics – Version A: open-drain status output – Version B: current sense analog output
• Wide operating voltage 3.5 to 40 V
TPS1H100AQPWPRQ1 TI
• Very-low standby current, <0.5 µA • Operating junction temperature, –40 to 150°C
• Input control, 3.3-V and 5-V logic compatible
• High-accuracy current sense, ±30 mA at 1 A, ±4 mA at 5 mA
• Programmable current limit with external resistor, ±20% at 0.5 A • Diagnostic enable function for multiplexing of mcu analog or digital interface
• Tested according to AECQ100-12 Grade A, 1 million times Short to GND test
• Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
• Protection – Overload and short-circuit protection – Inductive load negative voltage clamp – Undervoltage lockout (UVLO) protection Thermal shutdown/swing with self recovery – Loss of GND, loss of supply protection – Reverse battery protection with external circuitry
• Diagnostic – On- and Off-state output open- and short-tobattery detection – Overload and short to ground detection and current limit – Thermal shutdown/swing detection
• 14-Pin Thermally-enhanced PWP package
• Qualified for automotive applications • AEC-Q100 Qualified with the following results: – Device temperature grade 1: –40°C to 125°C ambient operating temperature range – Device HBM ESD classification level H3A – Device CDM ESD classification level C4B
• Functional safety capable – Documentation available to aid functional safety system design
• Single-channel smart high-side power switch with full diagnostics – Version A: open-drain status output – Version B: current sense analog output
• Wide operating voltage 3.5 to 40 V
TPS1H100AQPWPRQ1 TI
• Very-low standby current, <0.5 µA • Operating junction temperature, –40 to 150°C
• Input control, 3.3-V and 5-V logic compatible
• High-accuracy current sense, ±30 mA at 1 A, ±4 mA at 5 mA
• Programmable current limit with external resistor, ±20% at 0.5 A • Diagnostic enable function for multiplexing of mcu analog or digital interface
• Tested according to AECQ100-12 Grade A, 1 million times Short to GND test
• Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
• Protection – Overload and short-circuit protection – Inductive load negative voltage clamp – Undervoltage lockout (UVLO) protection Thermal shutdown/swing with self recovery – Loss of GND, loss of supply protection – Reverse battery protection with external circuitry
• Diagnostic – On- and Off-state output open- and short-tobattery detection – Overload and short to ground detection and current limit – Thermal shutdown/swing detection
• 14-Pin Thermally-enhanced PWP package
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.